This is my second attempt at a custom fidget spinner. My nephew is a huge Star Wars fan and I decided to try my hand at designing him one in Fusion 360. This was printed on my Prusa I3 MK2S using the Colorprint app to signal color changes at 1.10 mm and again at 6.10 mm. I printed it using supports for the overhang of the black portion that begins at 1.10 mm. I used 5/16" hex nuts as weights.
Printer Brand:
Prusa
Printer:
Prusa Mk2
Supports:
Yes
Resolution:
.1mm
Infill:
20%
