A simple tennis ball size toy that spins . 3 mm wall thickness , hollow inside. Consists of 3 parts , easy to assemble and dissassemble.
p.s. i am sure this can be fitted with a ball bearing and turned into a real spinner
Printer Brand:
Zortrax
Printer:
Zortrax M200
Rafts:
Yes
Supports:
Yes
Resolution:
0.19
Infill:
Prints fine with low infill
Notes:
I recommend leaving the orientation of the meshes as they are.
Assembly and info
Print with low infill and with two end caps facing stems down as shown in the screenshot for smoother results, or print with better supports.
Print time at 0.19 mm at high quality and low infill is ~9 hours
