Hello Everyone,
Feel free to use this spinner anyway you like and if you decided to make this, add some pictures in made tab. I appreciate it.
Size : 100x50x8 mm.
Printer:
Ivana 3D
Rafts:
No
Supports:
No
Resolution:
0.2 or less
Infill:
20% or more
Notes:
If I wanted to print it I would've used this parameters but feel free to use your own setting however you like.
How to use?
After you printed this spinner you will need a 608z ball bearing for the center, Any other ball bearings with 22mm outer diameter will work too.
If you want better results, you should glue the ball bearing in it's place.
Enjoy.
With Coreldraw X6
Well I just wanted to see how this turns out and I haven't started to learn about 3D designing yet so basically I designed this in 2D then separated in two parts Batman(black part) and Superman(red part).
Then I gave batman 4 millimeters height and superman 8 millimeters height.
At the end joined those two parts in slicer into one and done.
