I create a series of prefabricated 3D printed constructors. Currently, three ready-made designers are ready. In this article I will talk about the national team gun. The purpose of the project is the development of 3D printing for educational purposes.
The printing material is white PLA. The reason for choosing the material is simple:
low shrinkage. And since the elements of the designer should be approached to each other without fitting, shrinkage is the most important factor.
Excellent adhesion. Since the cannon itself is printed standing upright, a good adhesion of a small area is extremely important. However, you can still print only with the raft.
Safe.
The advantage of printed constructs is obvious.
Low cost price
you can select the desired scale
a fascinating process of printing and assembling the designer.
The cannon consists of eight parts. You can collect both on glue and without it. To paint details (if there is a desire) it is desirable still in the disassembled kind.
Printer:
Picaso PRO250
Rafts:
Yes
Supports:
No
Infill:
20%
