Está sacado del juego de DragonBall Xenoverse 2 y luego cambiado la postura con el Cinema 4D.
Lo he imprimido al 10% y al 0.15 con un Z=160mm y tardó 5h 30min.
ATENCIÓN !!: Mi modelo no uso soporte en las manos (cura 14) pero el nuevo (cura 15) si te añade los soportes y quedaría perfecto.
He is taken out of the game DragonBall Xenoverse 2 and then changed the stance with the 4D cinema.
He printed it at 10% and at 0.15 with a Z = 160mm and it took 5h 30min.
My model does not use the support in the hands (cure 14) but the new one (cure 15) if it adds the supports and it stays perfect.
Printer:
DMS DP5
Rafts:
Yes
Supports:
Yes
Resolution:
0.15
Infill:
10
