Portable "Connect Four" game complete with coins.
The game includes a board, two different coin styles, two caps and a font logo. The two caps are used to make the game portable and ensure that no coins are lost during transport. The two caps are also used to give a stable stand while playing (see picture).
There are two coin styles included (style A and B). Use whatever fits your taste. You'll need at least 21 coins per player. Use the "x25" files to print 25 coins at once. I also included .stl files with single coins in case you lost one and need to print a single coin only.
Printing the included font logo is optional. It's not mandatory but gives a decent look to your game. Use some glue to stick the logo on the board.
Printing:
Print all files in the orientation as provided in the .stl files.
No supports are needed, but make sure your heatbed has a good adhesion. Use a brim and heatbed temp of 60-65 degrees for best adhesion.
All files can be printed with a layer height of 0.3mm (less printing time). But you may also use 0.2mm of course.
Use Cura if Simplify3D refuses to import meshes correctly. Cura has better mesh importing capabilities.