A simple fidget spinner for minions fans. It is designed to be used with 608 bearings (22mm outer diameter, 8mm inner diameter and 7mm height). The outer bearings (for weight) can have a different inner diameter, but the centre one needs to be exact 8mm (the pins are designed for 8mm).
I recommend to use a ceramics bearing for the centre, it spins very well.
I used Onshape to design this: https://cad.onshape.com/documents/237bb4ca627bede95f5b5c02/w/273cc2d890f80d650f37feee/e/fb72322a3af921d229378721
Printer Brand:
Prusa
Printer:
Prusa Mk2
Supports:
No
