Nevaliashka / Неваляшка
Roly-poly toys are known in many countries and cultures. My design is based on traditional Russian toy, or rather it's later, plastic version produced in 1970s. Entire design is original, dimensions are only approximately matching historical toy. I sculpted the face after my daughter, when she was four month old, and stylised to toys general appearance.
License
You are free to re-use and re-mix my design.
Enjoy!
Stas
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
20% grid
Notes:
Use infill pattern that forms large, closed cells.
Assembly and additional materials required!
I would recommend printing this toy in two halves, this way you don't need rafts or supports. Use infill that produces large, closed cells - this is important.
Drill in to bottom cells from the flat side and fill cells with pellets. Small lead pellets work best. Fill only cells in bottom part of the large sphere. You can refer to Wikipedia article:
https://en.wikipedia.org/wiki/Roly-poly_toy
for illustration. Glue two parts of the toy together and hold them with rubber bands until glue settles.
Paint
If you want the original paint scheme, search for the word "Неваляшка". Traditional body is red, hood's trim and gloves are white, hair and eyes are black.
Designed entirely in Sculptris using Wacom tablet.
