Just got into 3D printing and thought i would give a try at modeling something other than parts. Model is scaled pretty large, the one in the photo was done at 20% scale and it is roughly 3.5 inches tall. The only problem when printing this small was the stem was really fragile even at 100% fill. Enjoy!
Printer:
Anet A8
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
10%
Notes:
Printed in PLA and painted. The tube was done at 25% infill and the stem at 100%. At a larger scale, stem should be stronger and could require less infill.
